This highly sought after Yashica-D TRL 120 Film Camera w/ 80mm 3.5 Lenses, has had a full Professional CLA (Clean, Lube, Adjust) and is tested and working 100%. Rarely found in this recently serviced condition.
Shutter speeds are set and dead on. Camera is in excellent condition. Some mild wear on a few body edges and a blemish on the leatherette on the side. Focus screen and mirror are excellent. Copal MXV Shutter unit.
Aperture unit cleaned and oil free. Elements are fungus and haze free.
And of course covered by our 90 Day Repair Warranty!
Come down to Paramount Camera & Repair to check it out yourself.
-Taking lens: Yashinon 80mm f/3.5, four elements, Bayonet I filter mount
-Aperture: up to f/22, setting: by a thumb wheel just above the left side of the taking lens, aperture and speed numbers are visible in a coupled small window just above thetaking lens
-Focus range: 1-20m +inf
-Viewing lens: Yashinon/Yashikor 80mm f/2.8
-Bayonet 1 filter/hood
-Focusing: Fresnel ground glass screen, via a big knob on the right side of the camera, w/ DOF scale
-Shutter: Copal MXV leaf shutter, speeds: 1-1/500 +B; setting: a thumb wheel just above the right side of the taking lens
Attention: do not change the speed after cocking the shutter
-Shutter release: on the right lower front side of the camera, over-lap type cable release can be fitted on the release knob
-Cocking lever: on the shutter behind the taking lens
-Frame counter: automatic resets, visible in a small window above the focusing knob
-Winding knob: right upper side of the camera, w/ film release button on the center of it; after a frame winding it locks, (no double exposure prevention, shutter can be released)
-Viewfinder: TLR waist level hood finder, Fresnel screen with grid lines, w/ flip up magnifying loop and flip down center for the sports finder
-Flash PC socket: left front upper side of the camera
-Flash sync: all speeds for M, 1/60 for X,
-Sync MX selector lever behind the aperture wheel
-Cold-shoe
-Memory dial : ASA/DIN, on the winding knob
-Self-timer: lever on the shutter, sync.lever must be on X position
-Back cover: hinged, opens by a locking lever and ring on the bottom of the camera
Loading: red triangle: inside of the camera back, for adjusting film arrow when loading, after closing the cover the letter S appears in the counter window automatically, then turn the knob until 1 appears in the window.
